Short answer: size a tankless heater by the hot water you run at the same time, measured in gallons per minute (GPM). Roughly 2 – 4 GPM suits 1 to 2 people, 5 – 7 GPM suits 3 to 4, and 8 – 10 GPM suits 5 or more. Check the heater’s flow at your local groundwater temperature, not just the headline rating.

Step 1: add up what runs at once
| Fixture | Typical flow |
|---|---|
| Shower | 1.5 – 2 GPM |
| Kitchen sink | 1 – 2 GPM |
| Dishwasher | 1 – 2 GPM |
| Washing machine | 1 – 1.5 GPM |
Two showers plus a dishwasher is about 4 to 6 GPM. Size for the busiest realistic moment, not an average hour.
Step 2: allow for cold groundwater
A heater’s rated GPM assumes a small temperature rise. In a cold climate, where incoming water is colder, the flow you actually get can be much lower, and electric units are hit hardest. Ask the installer or the manufacturer’s flow table for your area.
Step 3: match size to home and budget
| Size | Flow rate | Suits | Installed cost |
|---|---|---|---|
| Point of use | 1 – 2 GPM | One fixture | $150 – $500 |
| Small whole-house | 2 – 4 GPM | Small apartment | $500 – $1,000 |
| Medium whole-house | 5 – 7 GPM | 2 to 3 bedrooms | $1,000 – $2,000 |
| Large whole-house | 8 – 10 GPM | 4 or more bedrooms | $1,500 – $3,000 |
Don’t oversize: a bigger unit costs more to buy and install, and gas models also need a bigger gas line. Pick the smallest unit that meets your peak demand.
Next: price your size with the calculator, or see installation costs and our buying guide.
Sources: This Old House; Angi. The two-showers example is our own arithmetic from the fixture ranges. Prices last checked November 2026. How we make money. Related: point-of-use costs, is tankless worth it, compare models, all guides.