Skip to content
Tankless Costs Guide

Point-of-Use Tankless Water Heater Cost (2026 Price Guide)

Updated November 2026

Short answer: a point-of-use tankless water heater, sized for one sink, shower or appliance, costs about $150 – $500 (This Old House). The main extra is electrical: a new circuit adds roughly $200 – $600 if there isn’t a suitable one nearby.

Tankless Water Heater Cost Calculator

Sets the unit size: roughly 2-4 GPM for 1-2 people, 5-7 GPM for 3-4, 8-10 GPM for 5 or more.

Typical when moving from an electric or tank heater to gas tankless.

Gas tankless units need sealed stainless or PVC venting, often different from a tank heater's flue.

Sets local labor rates.

Your estimated cost

$1,800 – $4,200

Typical: $3,000

Using national average prices. Add your zip code for local prices.

  • Tankless unit$750 – $2,000
  • Installation labor and fittings$900 – $1,500
  • Removal of old heater$100 – $500
  • Permit$50 – $200
  • Ask whether the quote includes the permit, any required inspection and removal of the old unit.
  • Gas tankless heaters usually need a larger gas line and new venting. Have the installer check your gas meter and line size before you sign.
  • Hard water shortens a tankless heater's life. If your water is hard, ask about a softener or a scheduled descaling service.

Small point-of-use tankless water heater fitted under a bathroom sink

Choose “Electric, point-of-use” in the calculator to price your own job.

Point-of-use vs whole-house

SizeFlow rateSuitsCost
Point of use1 – 2 GPMOne fixture or appliance$150 – $500
Small whole-house2 – 4 GPMSmall apartment or condo$500 – $1,000
Medium whole-house5 – 7 GPM2 to 3 bedroom home$1,000 – $2,000
Large whole-house8 – 10 GPM4 or more bedrooms$1,500 – $3,000
Source: This Old House, updated June 2026.

When a point-of-use heater makes sense

  • A sink or bathroom far from the main heater, where hot water takes a long time to arrive.
  • An addition, garage, workshop or outbuilding where running a hot water line would cost more.
  • A boost for one fixture when the main heater can’t keep up.

It is not a cheap substitute for a whole-house heater. At 1 to 2 GPM it serves one outlet at a time, and in cold-water areas the usable flow is lower still. If you need hot water at several fixtures, compare the cost of a few small units with one whole-house electric or gas unit.

Extras to budget for

ItemTypical cost
New electrical circuit$200 – $600
Permit, where required$50 – $200
Source: This Old House, updated June 2026.

Check the electrics first. Even small units can need a dedicated circuit. Ask an electrician whether the nearest circuit and your panel can take the load before you buy.

Related: the sizing guide and installation costs in full.

Sources: This Old House. The “when it makes sense” advice is general guidance, not from that source. Prices last checked November 2026. How we make money. Related: repair costs, is tankless worth it, compare models, all guides.