Short answer: a professional flush (descale) of a tankless water heater costs about $150 – $350, according to HomeGuide. A do-it-yourself flush kit costs $100 – $300 and can be reused. Most makers and cost guides say to flush at least once a year, and more often with hard water.

Maintenance costs at a glance
| Job | Typical cost |
|---|---|
| Professional flush, tankless | $150 – $350 |
| DIY flush kit (pump, hoses, bucket, descaler) | $100 – $300 |
| Flush of a standard tank heater, for comparison | $75 – $150 |
| Burner or heating element replacement | $400 – $800 |
How often should you flush?
Navien recommends descaling at least once a year. It says you will need to do it more often the harder your water is, the higher you set the temperature and the more hot water you use. Angi gives the same yearly minimum and the same warning for hard-water areas. If you have very hard water, ask your installer whether twice a year, a scale filter or a water softener makes sense.
Why it matters
Minerals in the water build up as scale inside the heat exchanger. Left alone, scale can clog and corrode parts and push up running and repair costs. A heat exchanger is the most expensive part of the heater, so a yearly flush is cheap insurance. Some heaters show a warning code when scale builds up. See common problems and error codes.
Check your warranty. Read what your maker requires for maintenance and keep receipts or a dated record of each flush, in case you ever need to claim.
DIY or professional?
- DIY suits heaters fitted with isolation (service) valves. You circulate a descaling solution through the unit with a small pump, following the maker’s instructions. After the first kit, each flush costs only the descaler.
- A professional is the better choice if the unit has no service valves, if you are not comfortable isolating the gas, water and power, or if you want the rest of the heater checked at the same visit. Navien recommends hiring a professional.
Other routine jobs
- Clean the cold-water inlet filter.
- Check the air intake and vent are clear.
- Look for leaks and corrosion at the connections.
- On condensing units, check the condensate drain is not blocked.
Something already wrong? See repair costs, or use the calculator and choose “Repair my tankless heater”.
Sources: HomeGuide (costs); Navien and Angi (how often, and why). The list of other routine jobs is general guidance; follow your own heater’s manual. Prices last checked November 2026. How we make money. Related: installation costs, is tankless worth it, compare models, all guides.