Short answer: a point-of-use tankless water heater, sized for one sink, shower or appliance, costs about $150 – $500 (This Old House). The main extra is electrical: a new circuit adds roughly $200 – $600 if there isn’t a suitable one nearby.
Tankless Water Heater Cost Calculator
Your estimated cost
$1,800 – $4,200
Typical: $3,000
Using national average prices. Add your zip code for local prices.
- Tankless unit$750 – $2,000
- Installation labor and fittings$900 – $1,500
- Removal of old heater$100 – $500
- Permit$50 – $200
- Ask whether the quote includes the permit, any required inspection and removal of the old unit.
- Gas tankless heaters usually need a larger gas line and new venting. Have the installer check your gas meter and line size before you sign.
- Hard water shortens a tankless heater's life. If your water is hard, ask about a softener or a scheduled descaling service.
Sorry, we couldn't calculate that. Please check your answers, or reload the page.
Compare quotes from local tankless installers
Free, with no obligation. Local, pre-screened pros will contact you to confirm your project and give you a price.
Thanks! Your request is on its way. Local pros will contact you shortly, usually within a business day, to talk about your project.
Check your quote
We compare it with the estimate for your answers above and your zip code.
Estimates are a guide. Prices vary with your home and local conditions.
Questions to ask
Red flags

Choose “Electric, point-of-use” in the calculator to price your own job.
Point-of-use vs whole-house
| Size | Flow rate | Suits | Cost |
|---|---|---|---|
| Point of use | 1 – 2 GPM | One fixture or appliance | $150 – $500 |
| Small whole-house | 2 – 4 GPM | Small apartment or condo | $500 – $1,000 |
| Medium whole-house | 5 – 7 GPM | 2 to 3 bedroom home | $1,000 – $2,000 |
| Large whole-house | 8 – 10 GPM | 4 or more bedrooms | $1,500 – $3,000 |
When a point-of-use heater makes sense
- A sink or bathroom far from the main heater, where hot water takes a long time to arrive.
- An addition, garage, workshop or outbuilding where running a hot water line would cost more.
- A boost for one fixture when the main heater can’t keep up.
It is not a cheap substitute for a whole-house heater. At 1 to 2 GPM it serves one outlet at a time, and in cold-water areas the usable flow is lower still. If you need hot water at several fixtures, compare the cost of a few small units with one whole-house electric or gas unit.
Extras to budget for
| Item | Typical cost |
|---|---|
| New electrical circuit | $200 – $600 |
| Permit, where required | $50 – $200 |
Check the electrics first. Even small units can need a dedicated circuit. Ask an electrician whether the nearest circuit and your panel can take the load before you buy.
Related: the sizing guide and installation costs in full.
Sources: This Old House. The “when it makes sense” advice is general guidance, not from that source. Prices last checked November 2026. How we make money. Related: repair costs, is tankless worth it, compare models, all guides.