Skip to content
Tankless Costs Guide

Compare Tankless Water Heaters

Pick two or three models to compare fuel, flow rate, efficiency, warranty, unit price and an estimated installed cost side by side. Specs come from manufacturer spec sheets and retailer listings. A dash means we haven’t verified that detail yet. Last checked November 2026.

Popular comparisons: Navien NPE-240A2 vs Rinnai RX180iN · Rheem RTGH-95 vs Navien NPE-240A2 · Noritz NRC711 vs AO Smith ATI-510C · Electric vs gas (Rheem)

Price your install in the calculator

Green marks the best figure among the models you picked, for flow, efficiency and unit price. Estimated installed cost is the unit price plus typical labor and fittings from This Old House ($900 to $1,500 for gas, $150 to $1,000 for electric). It leaves out extras such as a new gas line, venting or an electrical upgrade, which the calculator adds. Flow rates are the maximum the maker quotes, and real flow is lower with cold incoming water. Warranties are for homes and have conditions, so check the maker’s terms.

All models we track

ModelFuelTypeMax flowEfficiency (UEF)Heat exchanger warrantyUnit price

How to read the comparison

  • Max flow rate is the most hot water the unit can deliver at once, in gallons per minute. See the sizing guide to work out what you need.
  • UEF (Uniform Energy Factor) measures efficiency. Higher is better. Condensing gas units score higher than non-condensing ones.
  • Warranty figures are the maker’s residential terms. Most require professional installation, and some are shorter if you add a recirculation pump.
  • Unit price is what we saw at a retailer, so it changes often and varies by seller.

Price your own install

Tankless Water Heater Cost Calculator

Sets the unit size: roughly 2-4 GPM for 1-2 people, 5-7 GPM for 3-4, 8-10 GPM for 5 or more.

Typical when moving from an electric or tank heater to gas tankless.

Gas tankless units need sealed stainless or PVC venting, often different from a tank heater's flue.

Sets local labor rates.

Your estimated cost

$1,800 – $4,200

Typical: $3,000

Using national average prices. Add your zip code for local prices.

  • Tankless unit$750 – $2,000
  • Installation labor and fittings$900 – $1,500
  • Removal of old heater$100 – $500
  • Permit$50 – $200
  • Ask whether the quote includes the permit, any required inspection and removal of the old unit.
  • Gas tankless heaters usually need a larger gas line and new venting. Have the installer check your gas meter and line size before you sign.
  • Hard water shortens a tankless heater's life. If your water is hard, ask about a softener or a scheduled descaling service.

More detail: Navien vs Rinnai, electric vs gas and the buying guide.

Sources: Rinnai; Navien NPE-2 spec sheet and warranty; Rheem RTGH and RTEX spec sheets; Noritz; A. O. Smith; retailer listings at SupplyHouse, Build.com, Ferguson and US Supply for prices; This Old House for labor costs. Last checked November 2026. How we make money.