Short answer: water heater repairs typically cost $150 – $500 (This Old House), and Angi puts the national average near $600, with most jobs between about $220 and $985. Tankless-specific figures are scarcer, so treat these as a guide and get an itemized quote for your model.
Tankless Water Heater Cost Calculator
Your estimated cost
$1,800 – $4,200
Typical: $3,000
Using national average prices. Add your zip code for local prices.
- Tankless unit$750 – $2,000
- Installation labor and fittings$900 – $1,500
- Removal of old heater$100 – $500
- Permit$50 – $200
- Ask whether the quote includes the permit, any required inspection and removal of the old unit.
- Gas tankless heaters usually need a larger gas line and new venting. Have the installer check your gas meter and line size before you sign.
- Hard water shortens a tankless heater's life. If your water is hard, ask about a softener or a scheduled descaling service.
Sorry, we couldn't calculate that. Please check your answers, or reload the page.
Compare quotes from local tankless installers
Free, with no obligation. Local, pre-screened pros will contact you to confirm your project and give you a price.
Thanks! Your request is on its way. Local pros will contact you shortly, usually within a business day, to talk about your project.
Check your quote
We compare it with the estimate for your answers above and your zip code.
Estimates are a guide. Prices vary with your home and local conditions.
Questions to ask
Red flags

Choose “Repair my tankless heater” in the calculator to see a range for your fuel type, then optionally request quotes from local pros.
Typical repair costs
| Repair or service | Typical cost |
|---|---|
| Flush or descale (labor) | $110 – $200 |
| Heating element, electric (professional repair) | $200 – $300 |
| Thermostat, electric | $150 – $200 |
| Thermostat, gas (part and labor) | About $200 |
| Thermocouple, gas | About $150 or less |
| Any water heater repair, typical range | $150 – $500 |
| Any water heater repair, national average | About $600 |
Gas-side repairs
| Repair | Typical cost |
|---|---|
| Gas valve replacement | $150 – $550 |
| Pressure relief valve | $75 – $150 |
| Thermostat repair | $75 – $150 |
| Vent repair | $50 – $125 |
Common tankless faults and what they usually mean
Tankless heaters have parts a tank heater does not, such as a flow sensor, a control board and, on condensing models, a condensate drain. We have not found a reliable national price for each of these, so this table shows the likely cause and who should fix it. Ask for an itemized quote that names the part.
| Symptom | Common causes | Who fixes it |
|---|---|---|
| No hot water, error code on the display | Gas supply off, ignition or flame sensor fault, blocked vent | Check the gas valve and look up the code; otherwise a technician |
| Water runs hot, then cold, then hot | Low flow at a single tap, scale, flow sensor | Clean the inlet filter and flush; then a technician |
| Lukewarm water at several taps | Heater too small for the demand, scale, cold incoming water | Check sizing; flush; then a technician |
| Overheating or scale error | Mineral buildup in the heat exchanger | Flush or descale, $110 – $200 |
| Water around a condensing unit | Blocked or leaking condensate drain or neutralizer | Technician |
| Unit will not power on (gas or electric) | Tripped breaker, failed control board or power supply | Reset the breaker once; then a technician or electrician |
Worked examples
- Scale error on a 6-year-old gas unit: a professional flush at $110 – $200. Add an isolation valve kit if the unit lacks one, so later flushes are easier.
- Failed gas valve on an 8-year-old unit: $150 – $550, well under a third of a new install, so repair usually makes sense.
- Leaking heat exchanger on a 16-year-old unit: likely out of warranty and a major part. Compare it with a new gas install at $1,650 – $3,500 before you approve the repair.
Repair or replace?
A common rule of thumb is to replace when a repair would cost around a third or more of a new unit and the heater is past mid-life. A tankless heater typically lasts 15 to 20 years and costs $1,200 – $3,500 installed, so a $200 flush on a 5-year-old unit is an easy yes, while a large repair on a unit near 15 years old is worth weighing against a new one. See installation costs.
Check the warranty first. Many heat exchangers and parts are covered for years, and an annual flush is often a warranty condition. Ask your installer what voids it.
Repair or replace by age
This table applies the one-third rule to the national average installed price of about $2,800. A third of that is roughly $900, which is the point where a single repair is worth weighing against a new heater.
| Heater age | What usually makes sense |
|---|---|
| Under 5 years | Repair. Check the warranty first, because the part is often still covered. |
| 5 to 10 years | Repair most faults. The parts warranty has often ended, so weigh any single bill near $900 or more. |
| 10 to 15 years | Repair small faults such as a flush, sensor or igniter. For a large bill, get a replacement quote too. |
| Over 15 years | Replace if the bill is large, the heat exchanger is failing or faults keep coming back. |
What the warranty usually covers
Before you pay for a repair, check whether the failed part is still under warranty. These are the residential terms for models we track.
| Brand (models we track) | Heat exchanger | Other parts |
|---|---|---|
| Rinnai RX, RU and RE | 15 years or 12,000 hours | 5 years |
| Navien NPE | 15 years (5 with uncontrolled recirculation) | 5 years |
| Noritz EZ and NRC | 25 years limited (EZ); 12 years (NRC) | 5 years (NRC) |
| AO Smith ATI | 15 years | 5 years |
| Rheem RTGH gas | 15 years (12 on older RTGH-95 units) | 5 years |
| Rheem RTEX electric | 5 years (heating chamber) | 1 year |
Questions to ask before you approve a repair
- Is there a diagnostic or service-call fee, and is it credited if you go ahead?
- What exactly failed, and is the part covered under warranty?
- What would a replacement cost, so you can compare?
Tankless repair FAQs
Why is my tankless water heater showing an error code?
The code points to the system that tripped, such as ignition, flame, venting, water flow or overheating. Some are simple, like a closed gas valve or a blocked inlet filter. Others need a technician. Look the code up in our error code guide before you book a call, and give the code to the technician.
Will the warranty cover my repair?
Often the part, rarely the labor. Gas tankless makers commonly cover the heat exchanger for 12 to 15 years and other parts for about 5 years, but labor coverage is short or absent. Warranties also carry conditions, such as professional installation, registration and regular flushing. Have your model number and installation date ready when you call.
Can I fix a tankless water heater myself?
Some upkeep, yes. Cleaning the cold-water inlet filter and flushing the unit with an isolation valve kit are common owner jobs, and the manual explains both. Anything involving gas, combustion, venting, wiring or internal parts is for a licensed professional. DIY repairs can also void the warranty.
Is it worth repairing a 10-year-old tankless heater?
Usually, for a small fault. A tankless heater can last 20 years or more, according to the US Department of Energy, so a 10-year-old unit may have plenty of life left. A large bill is different. If it comes to a third or more of a new install, compare it with replacement before you approve it.
How can I avoid repairs?
Flush the heater on the schedule in its manual, usually once a year and more often with hard water. Scale is behind many tankless faults, from lukewarm water to overheating codes. See maintenance and flushing costs.
Sources: This Old House; Angi. Prices last checked November 2026. How we make money. Related: is tankless worth it, sizing guide, compare models, all guides.