Skip to content
Tankless Costs Guide

Gas Tankless Water Heater Cost: 2026 Price Guide

A natural gas tankless water heater usually costs $1,650 – $3,500 installed. That is roughly $750 – $2,000 for the unit and $900 – $1,500 for installation. Propane units cost about the same to install, at $1,400 – $3,500 in total. A new gas line, new venting or a hard-to-reach location can push the price higher.

Gas fuel itself costs about $190 – $265 a year to run for natural gas. Use the calculator below to price your own job, or read on for unit, installation, extras and repair costs. Prices last checked November 2026.

Tankless Water Heater Cost Calculator

Sets the unit size: roughly 2-4 GPM for 1-2 people, 5-7 GPM for 3-4, 8-10 GPM for 5 or more.

Typical when moving from an electric or tank heater to gas tankless.

Gas tankless units need sealed stainless or PVC venting, often different from a tank heater's flue.

Sets local labor rates.

Your estimated cost

$1,800 – $4,200

Typical: $3,000

Using national average prices. Add your zip code for local prices.

  • Tankless unit$750 – $2,000
  • Installation labor and fittings$900 – $1,500
  • Removal of old heater$100 – $500
  • Permit$50 – $200
  • Ask whether the quote includes the permit, any required inspection and removal of the old unit.
  • Gas tankless heaters usually need a larger gas line and new venting. Have the installer check your gas meter and line size before you sign.
  • Hard water shortens a tankless heater's life. If your water is hard, ask about a softener or a scheduled descaling service.

Gas tankless cost: natural gas vs propane

Natural gas and propane tankless heaters cost about the same to install. Propane units can be cheaper to buy but need careful gas line sizing, a pressure check and sometimes a fuel conversion kit. The bigger difference is the fuel bill: propane costs more to run.

FuelUnitInstallationTotal installedFuel per year
Natural gas$750 – $2,000$900 – $1,500$1,650 – $3,500About $190 – $265
Propane$500 – $2,000$900 – $1,500$1,400 – $3,500About $350
Sources: This Old House, updated June 2026 (prices and natural gas running cost); Angi, 2026 data (propane running cost).

What the unit costs

Unit prices depend mostly on flow rate and efficiency. Large whole-house gas units (8 to 10 GPM, for homes with four or more bedrooms) run $1,500 to $3,000 installed according to This Old House. Angi puts the gas unit alone at $750 to $2,300, before labor. Condensing models use a second heat exchanger to capture more heat and cost more than non-condensing ones.

SizeFlow rateSuitsInstalled cost
Point of use1 – 2 GPMOne fixture or appliance$150 – $500
Small whole-house2 – 4 GPMSmall apartment or condo$500 – $1,000
Medium whole-house5 – 7 GPM2 to 3 bedroom home$1,000 – $2,000
Large whole-house8 – 10 GPM4 or more bedrooms$1,500 – $3,000
Source: This Old House, updated June 2026. Figures are shown as published; the source does not separate gas from electric on this table.

Condensing vs non-condensing gas tankless cost

Gas tankless heaters come in two designs. A non-condensing unit has one heat exchanger and sends hot exhaust outside. A condensing unit adds a second heat exchanger that takes more heat out of the exhaust, so it uses less gas. It costs more to buy and needs a drain for the acidic water that condenses out of the exhaust.

DesignEfficiency (UEF)Example models and unit pricesSuits
Non-condensing0.81 – 0.82AO Smith ATI-310C about $1,101; Rinnai RE180iN $1,091 – $1,776; AO Smith ATI-510C $1,366 – $1,654Lower budgets, smaller households, lower hot water use
Condensing0.93 – 0.98Rinnai RX180iN $1,273 – $1,960; Rheem RTGH-95DVLN $1,499 – $2,314; Navien NPE-240A2 about $2,099Larger households and high hot water use
Efficiency from maker spec sheets; unit prices from retailer listings, November 2026, before installation. See every model in the compare tool.

The price gap for the same size is often a few hundred dollars, and retailer prices overlap, so compare specific models and not just the two categories. Venting differs too: the two designs use different vent materials, so the vent quote depends on which you choose. Ask the installer to price the heater and its venting together.

Installation and extras

Installation takes about 4 to 8 hours. Gas installs cost more than electric ones because the unit needs a gas supply that can handle its burner and a sealed exhaust vent. Many older homes have a half-inch gas line that must be upsized for a high-output tankless unit, so ask your installer to check the line and the meter.

ItemTypical costNotes
Gas line update$350 – $750Longer runs or complex routing cost more; Angi says up to $1,000
Upsizing a ½-inch line to ¾-inch$400 – $800Common in older homes
Stainless steel venting$400 – $800Through a wall or the roof; Angi lists $240 – $549 for a professionally installed exhaust vent
Permit$50 – $200Some areas need separate plumbing and electrical permits
Safety inspection$74 – $150Where required
Removing the old heater$500 or moreCheck the quote includes disposal (Angi)
Annual descaling or flush$100 – $500Angi lists a basic flush at $110 – $200
Sources: This Old House, updated June 2026; Angi, 2026 data. Where the two differ we show both.

Worked examples: what a gas install adds up to

These examples add the unit, labor, permit and extras together for common gas jobs, using the ranges above. They are the same sums the calculator runs.

JobWhat is countedEstimated total
1 to 2 people, gas line and vent already suitableUnit, labor, permit$1,550 – $3,300
3 to 4 people, replacing an existing tankless unitUnit, labor, permit$1,700 – $3,700
3 to 4 people, new venting onlyUnit, labor, permit, venting$2,100 – $4,500
3 to 4 people, switching from a tankUnit, labor, permit, gas line, venting, old tank removal$2,550 – $5,750
5 or more people, switching from a tankUnit, labor, permit, gas line, venting, old tank removal$2,750 – $6,250
Our arithmetic from the This Old House ranges: gas line $350 – $750, venting $400 – $800, removal $100 – $500, permit $50 – $200. The unit price is scaled down by a fifth for 1 to 2 people and up by a quarter for 5 or more. National averages before local labor rates.

Before you accept a quote, ask which model is priced, whether the gas line and meter have been checked, whether venting, the permit and removal of the old heater are included, and whether an isolation valve kit is fitted so the unit can be flushed later.

Running costs, efficiency and lifespan

A natural gas tankless heater costs about $190 to $265 a year in fuel, and Angi estimates it saves around $110 a year against a gas tank model. The US Department of Energy says gas tankless units are 24% to 34% more energy efficient than storage tanks for homes that use about 41 gallons of hot water a day or less, and that tankless units can last 20 years or more, against 10 to 15 for a tank.

Efficiency depends on the model. Standard gas tankless units have an energy factor of about 0.82, and condensing units reach about 0.92 to 0.94, according to a US Department of Energy guide. The higher figure costs more up front and lowers your fuel bill, so it pays back fastest in high-use households.

Tax credit note: the federal energy-efficiency tax credit for tankless water heaters ended for equipment installed after December 31, 2025, even though some guides still advertise it. Utility rebates of $100 to $300 and brand rebates of $100 to $400 are still reported, so check your utility and the manufacturer before you buy.

What size gas tankless heater do you need?

Size by how much hot water you use at the same time, not by the number of people. Typical flow rates: water-saving shower head 1.5 GPM, standard shower 2.0 GPM, bathroom sink 0.5 GPM, kitchen sink 1 to 2 GPM, bathtub 4 GPM, dishwasher 1 to 2 GPM and washing machine 1 to 1.5 GPM. Add up what could run together. A shower, a dishwasher and a sink at once need about 3 to 4.5 GPM.

Buying tip: a unit’s rated GPM assumes warm incoming water. In a cold climate the flow you actually get can be about half the rating, because the heater has to raise the temperature further. Check the manufacturer’s temperature-rise chart, not just the headline number.

Indoor or outdoor gas unit?

Most gas tankless heaters come in an indoor version, which needs venting, and an outdoor version, which does not. Skipping the vent removes a $400 to $800 line from the job, and the outdoor unit itself can cost less: the outdoor Noritz NRC711 was listed at about $1,296 against about $1,458 for the indoor direct-vent version when we checked. Outdoor units suit mild climates. Where it freezes, the heater and its pipes need freeze protection, so most cold-climate homes fit an indoor unit.

Gas tankless repair costs

Angi puts the average tankless repair at about $600, and as much as $1,300 for a unit in poor condition. The most common gas-side jobs are cheaper:

RepairTypical cost
Descaling or flush$110 – $200
Gas valve replacement$150 – $550
Pilot light repair$75 – $150
Vent repair$50 – $125
Thermostat repair$75 – $150
Source: Angi, 2026 data. Parts and labor; your local rates will vary.

A failed heat exchanger can take 10 hours or more to replace, so for an older unit replacing the heater is often the better value than repairing it.

Gas tankless brands

Brand changes the unit price, not the labor. Our brand guides cover models, flow rates and warranties: Rinnai, Rheem, Navien, Noritz, AO Smith and Eccotemp. Unit-only prices for Rinnai and Rheem gas models on Home Depot in November 2026 ran from $1,081 to $1,867 and $995 to $1,449.

Get local quotes for a gas tankless install

An installer will check your gas line, meter and venting before giving a firm price. Use the calculator above to request free quotes from local pros, with no obligation.

Gas or electric?

Gas units deliver more hot water and often cost less to run, but they cost more to install. See our electric tankless guide and the gas vs electric comparison, or go back to the full tankless cost guide.

Gas tankless cost FAQs

Do I need a bigger gas line for a tankless water heater?

Often, yes. A whole-house gas tankless heater burns up to about 199,000 BTU an hour, several times what a tank heater uses, and many older homes have a half-inch line to the heater. Upsizing it to three-quarter inch costs about $400 to $800. The installer should also confirm the meter can supply the heater along with your other gas appliances.

Can a gas tankless heater use my old tank’s vent?

Usually not. Tankless heaters use sealed venting matched to the unit, so most switches from a tank need new venting at about $400 to $800. An outdoor model avoids the vent altogether.

Is a condensing gas tankless heater worth the extra cost?

It depends on how much hot water you use. Condensing units are more efficient, at about 0.92 to 0.98 against about 0.81 to 0.82, and cost a few hundred dollars more for the same size. The fuel saving repays that fastest in larger households. In a small household with low use, a non-condensing unit can be the better value.

Is propane more expensive than natural gas for a tankless heater?

The heater and installation cost about the same. The fuel costs more: about $350 a year for propane against $190 to $265 for natural gas. See propane tankless costs.

How long does a gas tankless install take?

About 4 to 8 hours. A new gas line or a vent run through the roof can add time, and some areas need an inspection before the heater is signed off.

How long does a gas tankless water heater last?

The US Department of Energy says tankless heaters can last 20 years or more, against 10 to 15 for a tank. Yearly flushing matters most in hard-water areas, and several makers make it a warranty condition. See maintenance and flushing costs.

How we get these prices

We take published national cost ranges, compare them, and show the source beside each table. Prices are national averages and change with your zip code, home and installer. This page replaces our 2022 version: we removed the old unit-price, brand-price and repair tables that we could no longer source, and kept the sizing guidance.

Sources:

Prices last checked November 2026. Related: installation costs, switching from a tank, repair costs, propane costs, sizing guide, compare models, all guides.